6
3
1
2
4
5
Cutter Blade Warning
There is a cutter blade inside. When
replacing or loading the paper roll, or clearing
paper jams, do not touch the parts this label
indicates. Otherwise an injury may result.
Replacing Paper Roll Warning
When replacing or loading the paper roll, do
not put the paper roll on the upper of the
paper roll tray. Otherwise the tray may fall
and an injury may result.
Holding Paper Roll Warning
Hold the paper roll horizontally with both
hands. When you grab the paper holder and
hold the paper roll vertically, the paper roll
may fall off and an injury may result.
Operating Cassette Tray Warning
When replacing or loading the paper, or clearing paper jams, pull out the cut paper tray slowly with
both hands. Do not pull out the cut paper tray with a single hand.
Otherwise the rear of the cut paper tray may fall and an injury may result.
6
8
9
10
12
ABB563S
Hot Surface Warning
The inside of the machine could be very hot. When replacing or loading the paper, or clearing paper jams, do
not touch the parts with a label indicating the "hot surface". Otherwise it could cause a personal burn.
Anti-Humidity Heater Hot Surface
Fusing Section Hot Surface
7
The higher temperature(145 ) applies to plain paper. Translucent paper can cause
the indicated part to reach 160 .
11
NeptuneC1zenGB_Preface1 Page 6 Thursday, January 15, 2004 4:28 PM
To Next Page
Loading...
