Copy Paper
73
6
Note
❒ To prevent misfeeds, do not use the following kinds of paper:
• Bent, folded, or creased paper
• Torn paper
• Slippery paper
• Perforated paper
• Rough paper
• Thin paper with little stiffness
• Paper with a dusty surface
• Adhesive labels
• OHP transparencies
❒ If you copy on to rough grain paper, the copy image might be blurred.
❒ When using non-recommended paper (especially chemically treated paper,
hemmed paper, film), paper jams may occur, paper wrinkle, or copy image
deteriorate.
❒ Do not use paper that has already been copied or printed on.
❒ Do not copy on both sides of paper.
❒ If you use paper roll hat is not marked with a black core, paper jams might
occur when the paper ends.
❒ Do not use paper printed onto with an inkjet printer, as it may become entan-
gled or jammed, which may damage the machine. In the worst event, this
may cause fire, depending on paper and ink type combination.
Paper Storage
Note
❒ When storing paper, the following precautions always should be followed:
• Do not store paper where it will be exposed to direct sunlight.
• Avoid storing paper in humid areas (humidity: 70% or less).
• Store on a flat surface.
❒ Do not store paper vertically.
❒ In high temperature and humidity environments, store paper in vinyl bags.
NeptuneC1_GBzen_F_FM_pre.book Page 73 Tuesday, December 16, 2003 5:03 PM
To Next Page
Loading...
