Control Panel
19
1
Display
The display shows machine status, error messages, and function menus.
Important
❒ A force or impact of more than 30 N (about 3 kgf) will damage the display.
The copying screen is displayed as default when the power is turned on.
When you select or specify an item on the display, it is highlighted thus: .
Keys appearing as cannot be used.
Display and Key Operations
The display is not touch-sensitive. Use the following keys to select the keys and
items on the display.
1.
Selection keys
To select an item on the display, press the
selection key below it.
Example (on the User Tools display):
• To select [Counter], press A.
• To select [Exit], press B.
2.
0
00
01
11
1 key
Press to highlight items and select them.
3.
Number keys
When items have a number, select them
using the number keys.
Example (on the User Tools display):
• To select 1 [System Settings], press the
number key {
{{
{1}
}}
}.
NeptuneC1_GBzen_F_FM_pre.book Page 19 Tuesday, December 16, 2003 5:03 PM
To Next Page
Loading...
