Getting Started
14
1
9.
Lower output tray (optional)
Delivers copies from the lower output
exit, and then sends them to the lower
output stacker. See “Copy Output Lo-
cations”, Copy Reference.
Options
Trays
1.
Paper roll tray 1
You can load one paper roll. See p.68
“Roll Feeder Type 240 A or 240 B”.
2.
Paper roll tray 2
You can load two paper rolls. See p.68
“Roll Feeder Type 240 A or 240 B”.
3.
Table
Put the main unit on this table. You can
store cut paper and so on inside it.
4.
Cut paper tray
Load cut paper here. You can load up to
250 A3 sheets.
Note
❒ The paper roll tray must be installed.
ABB011S
NeptuneC1_GBzen_F_FM_pre.book Page 14 Tuesday, December 16, 2003 5:03 PM
To Next Page
Loading...
