Guide to Components
15
1
❖
❖❖
❖ Paper roll tray
This illustration shows paper roll tray 2.
1.
Paper roll 1
2.
Paper roll 2
3.
Cutter knob
Use to manually cut paper if there are
paper jams in the cutter area of the
machine. Always return the cutter
knob to the left or right end.
4.
Paper holder
The two paper holders grip the paper
roll and are mounted on the paper roll
tray's roll holder.
5.
Paper feed knob
Use when loading paper rolls or clear-
ing paper jams. See p.47 “Loading Pa-
per” and p.52 “xClearing Misfeeds”.
6.
Roll holder
Adjust this to the size of the paper roll
you are using. See p.56 “Changing the
Paper Roll Size”.
Other Options
❖
❖❖
❖ Printer unit
Allows you to use the printer function.
❖
❖❖
❖ Scanner unit
Allows you to use the scanner function.
❖
❖❖
❖ HDD
You can increase the capacity of the HDD and the copy function, like the fol-
lowing:
• Repeat Copy (longer than A0(E)K)
• Stamp (User Stamp, Repeat User Stamp)
• User Format Overlay
❖
❖❖
❖ Stamp board
Provides Background Numbering, Repeat User Stamp, Preset Stamp, User
Stamp, Date Stamp, and Page Numbering functions.
1
6
3
44
5
2
AAJ008S
NeptuneC1_GBzen_F_FM_pre.book Page 15 Tuesday, December 16, 2003 5:03 PM
To Next Page
Loading...
