25
2. Combined Function
Operations
Switching between Functions
You can use this machine not only as a copier, but also as a printer or scanner.
Note
❒ Depending on the options you have installed, you may not be able to switch
to some functions:
Limitation
❒ You cannot switch functions in the following circumstances:
• While copying.
• While adjusting system settings.
• While the machine is warming up.
• When the machine has been turned off automatically.
-
--
-System Reset
The machine returns automatically to its initial condition when the job is fin-
ished, after a certain period of time has elapsed. This function is called "System
Reset".
Note
❒ You can change the System Reset time. See p.42 “System Auto Reset”.
NeptuneC1_GBzen_F_FM_pre.book Page 25 Tuesday, December 16, 2003 5:03 PM
To Next Page
Loading...
