Guide to Components
13
1
❖
❖❖
❖ Rear
1.
Upper output guide
Takes delivered paper to the upper
output stacker.
2.
Original exit switching lever
Takes originals to the original output
guide, and switches delivery to the
rear output. See “Original Output Lo-
cations”, Copy Reference.
3.
Original exit
Originals are delivered here.
4.
Ventilation holes
Prevent overheating. Do not obstruct
them by placing anything near or
leaning objects against them. If the
machine overheats, a failure might oc-
cur.
5.
Original output guide
Stacks originals delivered to the rear
output.
6.
Anti-humidity heater switch (op-
tional)
When humidity is high, paper in the
paper roll or cut paper trays may ab-
sorb moisture, which can affect copy
quality. The anti-humidity heater pre-
vents this. Turn this switch on when
humidity is high. See p.24 “Anti-hu-
midity Heater Switch” .
7.
Upper output exit
When the upper output is selected,
copies are delivered there. See “Copy
Output Locations”, Copy Reference.
8.
Lower output exit
When the lower output is selected,
copies are delivered there. See “Copy
Output Locations”, Copy Reference.
AAJ007S
1
2
3
5
4
6
7
9
8
NeptuneC1_GBzen_F_FM_pre.book Page 13 Tuesday, December 16, 2003 5:03 PM
To Next Page
Loading...
