Fax Destination
165
7
J Press [End].
K Press the {OK} key.
L Press the {User Tools/Counter} key.
Note
❒ To change the name, see "Changing a Name".
Reference
p.166 “Changing a fax number”
p.166 “Programming the SUB Code”
p.167 “Programming the SEP Code”
p.168 “Setting the International TX Mode”
p.169 “Setting label insertion”
p.140 “Changing a Registered Name”
Using a Fax Destination as a sender
Following describes the procedure for using a fax number as the sender (sending
number).
A Press [Details].
B Select [Auth. Protect] using {U} or {T}, and then press the {OK} key.
To Next Page
Loading...
