Ricoh Aficio MP 2000L General Settings Guide

System Settings
40
2
Tray Paper Settings
This section describes the user tools in the Tray Paper Settings menu under Sys-
tem Settings.
Default settings are shown in bold type.
Important
❒ If the specified paper size differs from the actual size of the paper loaded in
the paper tray, a misfeed might occur because the correct paper size was not
detected.
❖ Paper Size: Tray 1-4
Select the size of the paper loaded in the paper tray 1.
If the paper size set for the selector in the paper tray is different to the paper
size for this setting, the paper size of the selector has priority.
If you load paper of a size not indicated on the paper size selector in the paper
tray, set the selector to "p".
•Type 1
The paper sizes you can set for Tray 1 are as follows:
A3L, A4K, A4L, A5K, B4 JISL, B5 JISK, B5 JISL, 11"×17"L,
8
1
/
2
"×14"L, 8
1
/
2
"×13"L, 8
1
/
2
"×11"K, 8
1
/
2
"×11"L, 8
1
/
4
"×14"L,
8
1
/
4
"×13"L, 8"×13"L, 7
1
/
4
"×10
1
/
2
"K, 7
1
/
4
"×10
1
/
2
"L, 5
1
/
2
"×8
1
/
2
"K,
8KL, 16KK, 16KL, Custom Size
The default setting is 8
1
/
2
"×11"L.
Custom size papers set for Tray Paper Size: Tray1 will be as follows:
Vertical: 182.0 to 297.0 mm (7.17 to 11.69 inch), Horizontal: 152.0 to 432.0
mm (5.99 to 17.00 inch)
The paper sizes you can set for Tray 2, 3 are as follows:
A3L, A4K, A4L, A5L, B4 JISL, B5 JISK, B5 JISL, 11"×17"L,
8
1
/
2
"×14"L, 8
1
/
2
"×13"L, 8
1
/
2
"×11"K, 8
1
/
2
"×11"L, 8
1
/
4
"×14"L,
8
1
/
4
"×13"L, 8"×13"L, 7
1
/
4
"×10
1
/
2
"K, 7
1
/
4
"×10
1
/
2
"L, 5
1
/
2
"×8
1
/
2
"L,
8KL, 16KK, 16KL, Custom Size
The default setting is A5L.
Custom size papers set for Tray Paper Size: Tray1 will be as follows:
Vertical: 182.0 to 297.0 mm (7.17 to 11.69 inch), Horizontal: 152.0 to 432.0
mm (5.99 to 17.00 inch)

Ricoh Aficio MP 2000L Specifications

General

Brand	Ricoh
Model	Aficio MP 2000L
Category	All in One Printer
Language	English