Registering Folders
221
7
F Press the {OK} key.
G Press [Details].
H Select [Folder Info] using {U} or {T}, and then press the {OK} key.
I Select [NCP] using {U} or {T}, and then press the {OK} key.
J Select the connection type using {U} or {T}, and then press the {OK} key.
If you want to specify a folder in an NDS tree, press [NDS]. If you want to spec-
ify a folder on a NetWare server, press [Bindery].
K Select [Manual Entry] or [Browse Network] to specify the path entry method us-
ing {U} or {T}, and then press the {OK} key.
To specify a folder, you can either enter the path manually or locate the folder
by browsing the network.
To Next Page
Loading...
