System Settings
42
2
❖ Paper Type: Tray 1-4
Sets the display so you can see what type of paper is loaded in the each paper
tray. The print function uses this information to automatically select the pa-
per tray.
• The paper types you can set are as follows:
No Display (Plain Paper), Recycled Paper, Special Paper, Colour Paper,
Letterhead, Preprinted Paper, Prepunched Paper, Bond Paper, Cardstock
The default setting for Paper Type is No Display (Plain Paper).
The default setting for APS is On.
The default setting for Duplex is On (Type 2 only).
When paper of the same type and size is loaded in two different paper trays
and you want to specify tray for 2 Sided Copy and tray for 1 Sided Copy,
specify the upper tray for 2 Sided Copy. If one of the trays is specified as the
default in Paper Tray Priority, assign 2 Sided Copy to that tray.
A appears next to the paper tray if [Off] is selected in [APS].
[APS] can only be selected for the copier function if [No Display (Plain Paper)]
and [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not
valid for the tray.
❖ Ppr Tray Priority:Copier (copier)
Specify the tray to supply paper for output.
The default setting is Tray 1.
❖ Ppr Tray Priority:Fax (facsimile)
Specify the tray to supply paper for output.
The default setting is Tray 1.
❖ Ppr Tray Priority:Printer (printer)
Specify the tray to supply paper for output.
The default setting is Tray 1.
Reference
p.4 “Accessing User Tools”
p.69 “Auto Tray Switching”
To Next Page
Loading...
Need help?
General
