System Settings
44
2
❖ Facsimile Auto Reset Timer (facsimile)
Specifies the time to elapse before the facsimile mode resets.
The time can be set from 30 to 999 seconds, using the number keys.
The default setting is 30 sec..
❖ Printer Auto Reset Timer (printer)
Specifies the time to elapse before the printer function resets.
The default setting is On.
The time can be set from 10 to 999 seconds, using the number keys.
The default setting time is 60 sec..
❖ Scanner Auto Reset Timer (scanner)
Specifies the time to elapse before the scanner function resets.
The default setting is On.
If [Off] is selected, the machine will not automatically switch to the user code
entry screen.
The time can be set from 10 to 999 seconds, using the number keys.
The default setting time is 60 sec..
❖ Set Date
Set the date for the machine's internal clock.
To change between year, month, and day, press {W} and {V} key.
Enter the year, month, and day using the number keys.
❖ Set Time
Set the time for the machine's internal clock using the number keys.
Enter time in the 24-hour format (in 1 second increments).
To change between hours, minutes and seconds, press {W} and {V} key.
❖ Auto Logout Timer
Specify whether or not to automatically log out a user when the user does not
operate the machine for a specified period of time after logging in.
The default setting is Off.
When [On] is selected, the time can be set from 60 to 999 seconds, in one sec-
ond increments, using the number keys.
The default setting is 180 sec..
Reference
p.4 “Accessing User Tools”
To Next Page
Loading...
Need help?
General
