Fax Features
86
4
B Enter the fax header, and then press the {OK} key.
To change the programmed Fax Header, press the {Clear/Stop} key, and then
enter again.
Note
❒ You can register up to 32 characters in the Fax Header.
❒ You can use characters, symbols, numbers, and spaces.
Reference
"Entering Text", About This Machine
Programming/Changing Own Name
A Select [Own Name] using {U} or {T}, and then press the {OK} key.
B Enter the own name, and then press the {OK} key.
To change the programmed Own Name, press the {Clear/Stop} key, and then
enter again.
Note
❒ You can register "Own Name" using up to 20 alphanumeric characters and
symbols.
Reference
"Entering Text", About This Machine
To Next Page
Loading...
Need help?
General
