Basic Procedure for Sending E-mail
13
1
Basic Procedure for Sending E-mail
This section describes the basic operation for sending scan files by e-mail.
A Make sure that no previous settings remain.
If a previous setting remains, press the {Clear Modes} key.
B If the Network Delivery Scanner or Scan to Folder screen is displayed,
press [] to switch to the E-mail screen.
C Place originals.
D If necessary, select the original type.
For details, see "Selecting Original Type".
E If necessary, specify the scanning density.
For details, see "Adjusting Image Density".
F Select the destination.
You can specify multiple destinations.
For details, see "Specifying E-mail Destinations".
G Press [Options], select [Sender's Name], and then specify the e-mail sender.
For details, see "Specifying the Sender".
H If necessary, select [Return Receipt] under [Options] to make settings for the
Return Receipt function.
For details, see "Setting the Return Receipt Function".
To Next Page
Loading...
Need help?
General
