Specifying the Sender
29
1
Selecting a Sender Registered to a Quick Dial Key
This section explains how to select a sender registered to a Quick Dial key.
For details about how to register e-mail senders to Quick Dial keys, see General
Settings Guide.
A Press [Options].
B Select [Sender's Name], and then press the {OK} key.
C Press the Quick Dial key to which the sender is registered.
The illustration is an example. The actual appearance may be different.
D Press the {OK} key.
"Programmed" appears, and then the Send Options screen reappears.
ZZZ609S
To Next Page
Loading...
