Delivering Scan Files
78
3
Basic Delivery Procedure
This section describes the basic operation for delivering scan files using the net-
work delivery scanner.
Important
❒ You must register destinations and senders in advance using the ScanRouter
delivery software installed on the delivery server.
A Make sure that no previous settings remain.
If a previous setting remains, press the {Clear Modes} key.
B If the E-mail or Scan to Folder screen is displayed, press [] to switch
to the Network Delivery Scanner screen.
C Place originals.
D If necessary, select the original type.
For details, see "Selecting Original Type".
E If necessary, specify the scanning density.
For details, see "Adjusting Image Density".
F Select the destination.
You can specify multiple destinations.
For details, see “Specifying Delivery Destinations”.
G If necessary, press [Options] to specify the resolution and the orientation of
the originals.
For details, see "Specifying Send Options".
To Next Page
Loading...
