Specifying Scan to Folder Destinations
51
2
Selecting a Destination Registered in the Machine's Address Book
This section explains how to select a destination from the machine’s address book.
Important
❒ To use this function, you must register destinations in [System Settings] in advance.
There are four methods of selecting a destination that is registered in the ma-
chine's address book:
• Select a destination from the list
• Enter the destination's registration number
• Search for a destination by name
• Search for a destination by folder path
Note
❒ If you have specified the protection code for accessing the address book, the
screen for entering the protection code appears.
❒ Depending on the security settings, some destinations may not appear in the
destination list.
Selecting a destination folder from the list
Use the following procedure to select a destination from the list.
A Press the {Search Destination} key.
The illustration is an example. The actual appearance may be different.
B Press the {U} or {T} key to select [Display List], and then press the {OK} key.
ZZZ610S
To Next Page
Loading...
Need help?
General
