Specifying Scan to Folder Destinations
71
2
Registering the Path to the Selected Destination in the Address Book
This section explains how to register folder paths you have entered manually or
specified by browsing the network to the machine's address book.
A Press the {Check Destination} key.
The illustration is an example. The actual appearance may be different.
B Press the {U} or {T} key to display the destination you want to register, and
the press [Program].
C Enter the name, and then press the {OK} key.
D Press [Details] and [Reg. No.] to specify registration information. After you
have made all settings, press the {OK} key.
Note
❒ Depending on the security settings, [Program] may not appear. In such case,
you cannot complete registration. For detail, consult you administrator.
ZZZ611S
To Next Page
Loading...
Need help?
General
