Specifying E-mail Destinations
23
1
Searching for a Destination in the LDAP Server
You can search the LDAP server for an address and then specify that address as
an e-mail destination.
Important
❒ To use this function, you must connect an LDAP server to the network.
❒ It is necessary to register the LDAP server under [System Settings]. Also, set [LDAP
Search] to [On] under [System Settings]. For details, see “General Settings Guide”.
A Press the {Search Destination} key.
The illustration is an example. The actual appearance may be different.
B Select [Search LDAP], and then press the {OK} key.
C Select [Select Server], and then press the {OK} key.
D Select the server, and then press the {OK} key.
If authentication is required to access the server, the authentication screen ap-
pears. Enter the user name and password correctly.
The Search LDAP screen reappears.
ZZZ610S
To Next Page
Loading...
