Specifying Scan to Folder Destinations
59
2
I Press the {OK} key.
Note
❒ If authentication is required to access the folder, the login screen appears.
Enter the user name and password.
❒ If you change the protocol after entering the path name, user name, or pass-
word, a confirmation message appears.
❒ To modify or change an entered folder path, press [EditDest].
❒ To add another destination, press [Add Dest], and then enter its folder path.
❒ The connection test may take time.
❒ Even if the connection test was successful, the machine may fail to transfer
the file if you do not have write privileges for the shared folder or there is
not enough free hard disk space.
❒ You can register the destination path in the machine’s address book. For
details, see “Registering the Path to the Selected Destination in the Address
Book”.
Reference
p.71 “Registering the Path to the Selected Destination in the Address
Book”
To Next Page
Loading...
Need help?
General
