Registering Addresses and Users for Facsimile/Scanner Functions
238
7
Changing a NCP folder
This section describes how to change the registered NCP folder.
A Press [System Settings].
B Press [Administrator Tools].
C Press [TNext].
D Press [Address Book Management].
E Check that [Program / Change] is selected.
F Select the user of the registered folder you want to change.
Press the name key, or enter the registered number using the number keys.
If you press , you can search by the registered name, user code, fax number,
folder name, e-mail address, or IP-Fax destination.
G Press [Folder].
H Select "Connection Type".
If you want to specify a folder in an NDS tree, press [NDS]. If you want to spec-
ify a folder on a NetWare server, press [Bindery].
I Specify the folder.
J Press [Connection Test] to check the path is set correctly.
K Press [Exit].
Note
❒ To change the name, key display and title, see “Changing a Registered Name”.
Reference
p.196 “Changing a Registered Name”
p.239 “Changing the registered NCP folder”
To Next Page
Loading...
