Protection Using Encryption
143
5
G Click [OK].
[Requesting] appears for [Certificate Status] in the Certificates area.
H Log off from the machine.
I Apply to the certificate authority for the server certificate.
The application procedure depends on the certificate authority. For details,
contact the certificate authority.
For the application, click the Web Image Monitor Details icon and use the in-
formation that appears in Certificate Details.
Note
❒ Using Web Image Monitor, you can create the contents of the server certif-
icate but you cannot send the application.
❒ Click [Cancel Request] to cancel the request for the server certificate.
Installing the Server Certificate (Certificate Issued by a Certificate Authority)
Install the server certificate using Web Image Monitor.
This section explains the use of a certificate issued by a certificate authority as
the server certificate.
Enter the server certificate contents issued by the certificate authority.
A Open a Web Image Monitor.
B Enter "http://(machine's-address)/" in the address bar to access the printer.
C Log onto the machine.
The network administrator can log on.
Enter the login user name and login password.
D Click [Configuration], under [Security], click [Device Certificate].
The [Device Certificate] page appears.
E Click [Install].
F Enter the contents of the server certificate.
In the [Certificate Request] box, enter the contents of the server certificate re-
ceived from the certificate authority.
Reference
For details about the displayed items and selectable items, see Web Image
Monitor Help.
G Click [OK].
[Installed] appears under [Certificate Status] to show that a server certificate for
the machine has been installed.
To Next Page
Loading...
Need help?
General
