Facsimile Features
140
4
F Press [Change] for "Prefix".
G Enter the Prefix using the number keys, and then press [OK].
To change the existing prefix, press [Clear], and then enter a new prefix.
For documents sent using a gateway to G3 Fax, prefixes can be used. If the
first several digits of IP-Fax number and the gateway- specific prefix are
identical, documents can be transmitted using the registered digits of the
gateway. For example, if both 03 and 04 have been registered as gateway
number while 0312345678 is also specified, documents can be transmitted
via a gateway for which 03 is used as a prefix.
When you wish to use the gateways regardless of the IP-Fax destination
numbers, register only the gateway addresses without registering the pre-
fix.
H Select a protocol.
I Press [Change] for Gateway Address.
J Enter the gateway address, and then press [OK].
K Press [OK].
Delete:
A Press [Facsimile Features].
B Press [Initial Settings].
C Press [Program / Change / Delete Gateway].
D Press [Delete], and then select a gateway to delete.
E Press [Yes] on the confirmation message.
If you do not want to delete the gateway you have selected, press [No].
F Press [Exit].
G Press the {User Tools/Counter} key.
Reference
p.3 “Accessing User Tools”
p.135 “Memory Lock Reception”
p.146 “Registering Fax Information”
p.154 “Parameter Settings”
p.164 “Memory Lock”
To Next Page
Loading...
Need help?
General
