Facsimile Features
172
4
L Enter the vertical size of the paper using the number keys, and then press
the {q} key.
Specify a vertical size from 90 mm (3.6") to 305 mm 12.0"). You cannot enter a
size smaller than 90 mm or larger than 305 mm.
Each time you press [mm] or [inch], the units switch between "mm" and "inch".
If you enter a length and change the units by pressing [mm] or [inch], it is con-
verted automatically (fractions are rounded off).
M Enter the horizontal size of the paper using the number keys, and then
press the {q} key.
Specify a horizontal size from 148 mm (5.9") to 600 mm (23.7"). You cannot en-
ter a size smaller than 148 mm or larger than 600 mm.
Each time you press [mm] or [inch], the units switch between "mm" and "inch".
If you enter a length and change the units by pressing [mm] or [inch], it is con-
verted automatically (fractions are rounded off).
N Press [OK].
O Press [Exit].
P Press the {User Tools/Counter} key.
Note
❒ If you select [Auto Detect], the machine recognizes the paper size automati-
cally.
Reference
"Reception Settings", Facsimile Reference
To Next Page
Loading...
