• To copy onto custom size envelopes, you must specify the envelope's dimensions. Be sure to include
the fully open flap in the horizontal dimension.
1. Vertical size
2. Horizontal size
• Check the envelopes are not damp.
• Load only as much envelopes as can be held between the paper guides on the bypass tray. For the
number of envelopes that you can set on the bypass tray, see “Recommended Paper Sizes and Types”,
About This Machine.
• Check there is no air in the envelopes before loading.
• To get better print quality, it is recommended that you set the right, left, top, and bottom print margin,
to at least 15 mm (0.6 inch) each.
• You cannot print envelopes with the Duplex function.
• Load only one size and type of envelope at a time.
• Before loading envelopes, flatten leading edges (the side going into the machine) by pressing a pencil
or ruler across them.
• Before loading envelopes, check they are rectangular in shape.
• For details about supported envelope types, see “Envelopes”, About This Machine.
2. Basic Copying
52
To Next Page
Loading...
