• Paper can be punched only if it meets the machine's size and orientation requirements. For details
about which sizes and weights of paper that can be punched, see “Appendix”, About This Machine.
• When using the Punch and Combine, Double Copies, or Auto Reduce / Enlarge, the message "Orig.
and paper orientation mismatched for Punch mode. Cancel Punch mode or change paper orientation
in tray." may appear because of the orientation of the original and the copy paper. If this occurs,
change the orientation of the copy paper.
• Since punch holes are made in each copy, the punch hole positions vary slightly.
• p.235 "Input / Output"
Finishing
93
To Next Page
Loading...
