When Finisher SR3030 is attached (Type 3 and 4):
When Booklet Finisher SR3020 is attached (Type 3 and 4):
3. Enter the number of copy sets with the number keys.
4. Press [OK].
5. Place the originals, and then press the [Start] key.
• When placing originals on the exposure glass, start with the first page to be copied. When placing
originals in the ADF, set so that the first page is on the top.
• You can change the punch hole types shown on the initial display under Input / Output in User Tools.
For details, see “Input / Output”.
2. Basic Copying
92
To Next Page
Loading...
