*2
The paper tray fence is fixed. If you wish to change the size of paper, contact your service representative.
*3
The paper size is detected automatically.
*4
Select the paper size under Tray Paper Size: Tray 2-3 in System Settings. See “System Settings”, General Settings
Guide.
*5
Press [Bypass], and the [ ] key, and then select the paper size.
*6
Press [Bypass], and the [ ] key, and then enter the paper size using the number keys.
*7
If you wish to copy onto OHP transparencies, select [OHP (Transparency)].
*8
For details about loading envelopes, see “Envelopes”.
*9
The optional tab sheet holder is required.
*10
Depending on the paper thickness, the actual paper capacity may be less than specified.
*11
It is recommended to place one sheet at a time.
*12
The optional B4 JIS/8
1
/
2
× 14 tray unit is required to load B4 JIS/8
1
/
2
× 14 size paper. (2,500 sheets can
be loaded in this tray.)
*13
Select the paper size under Tray Paper Size: LCT in System Settings. See “System Settings”, General Settings
Guide.
*14
If you want to copy onto custom size paper, select the size using the Tray Paper Settings function. See “System
Settings”, General Settings Guide.
*15
When loading translucent paper, set the paper direction according to the grain.
Paper Thickness
Paper Thickness Metric version
Inch version
(Bond paper)
Inch version
(Cover paper)
Inch version
(Index paper)
Thin Paper 52.3 - 65.9 g/
m
2
13.9 - 17.9 lb. 19.3 - 23.9 lb. 28.9 - 36.4 lb.
Plain Paper 1 66 - 80.9 g/m
2
18 - 21.9 lb. 24 - 29.9 lb. 36.5 - 44.9 lb.
Plain Paper 2 81 - 100.9 g/m
2
22 - 26.9 lb. 30 - 37 lb. 45 - 55.9 lb.
4. Appendix
108
To Next Page
Loading...
