Bit SW 2: Not used. Do not change these settings.
Bit SW 3: Emulation
Bit Function Default Details
0 Not Used --- ---
1 Not Used --- ---
2 PCL5e/5c 0 Makes the printer compatible with old HP PCL
printer drivers (HP4000, HP8000, etc.)
3 Not Used --- ---
4 Not Used --- ---
5 Not Used --- ---
6 Not Used --- ---
7 Not Used --- ---
Bit SW 4. Not used. Do not change these settings.
Bit SW 5. Functions Common to All Models
Bit Function Default Details
0 Not Used --- ---
1 Counter menu display
for charge on printer
use, printing enabled
after coverage
counted up.
0 This is a GW specification.
0: Does not print.
1: Prints
2 Error skip. 0 Switches error skip on/off
0: Errors skipped regardless of paper size, paper
type.
1: Error skipped only for PPC.
3 Not Used --- ---
4 Not Used --- ---
Service Mode, Engine Maintenance
29
To Next Page
Loading...
