SH-P1 Training
66
Slide 66
Achieving 50 CPM
with Mono-component Toner
New toner
New toner was developed to improve fusibility and development
at higher speed. (Toner is modified based on Midas/Per' toner.)
The silica component of the toner is decreased compared to the
Midas/Per' toner.
»Merits:
– reduces metering blade wear
– extends the life of the development roller
» Demerit:
– The margin for smudged image is decreased. (However, there
is no problem on actual usage.)
Development roller
Uses a larger circumference development roller
Dual charge rollers
To ensure the sufficient charging for the life of AIO, the SH-
MF1/P1 machines use two charge rollers. (In high speed
machines, there is a possibility that charge rollers become dirty.)
No additional notes.
To Next Page
Loading...
