3000 SHEET FINISHER (B478/B706)
SM 1-67 B064 Series/B140 Series/G126
Installation
9. Attach the shift tray [A] ( x 4) (M3 x 8).
10. Open the front door of the finisher, and remove the screw from the locking
lever, then pull out the locking lever [B].
11. Align the finisher on the joint brackets, and lock it in place by pushing in the
locking lever [B].
NOTE: Before securing the locking lever, make sure that the top edges of the
finisher and the copier are parallel from front to rear as shown [C].
12. Secure the locking lever [B] ( x 1) and close the front door.
13. Connect the finisher cable [D] to the copier.
14. Set the leveling shoes (x 4) under the feet and level the machine.
B478I006.WMF
B478I534.WMF
[A]
[B]
[C]
[D]
To Next Page
Loading...
