Ricoh B064 - Entrance and Stapler Tray Entrance Sensors; Stapler Tray Entrance Sensor

REPLACEMENT AND ADJUSTMENT
B706 14 SM
3.5.4 ENTRANCE AND STAPLER TRAY ENTRANCE SENSORS
Entrance Sensor
1. Disconnect the finisher from the copier.
2. Remove the sensor bracket [A] ( x 1).
3. Replace the entrance sensor [B] ( x 1,  x 1).
Stapler Tray Entrance Sensor
1. Open the front door.
2. Remove the sensor bracket [C] ( x 1).
3. Replace the stapler tray entrance sensor [D] ( x 1,  x 1).
B706R513.WMF
B706R514.WMF
[B]
[A]
[D]
[C]