Ricoh B064 - Installation

COPY CONNECTOR KIT (B328-03) FOR B140 SERIES
SM 1-61 B064 Series/B140 Series/G126
Installation
Installation
1. Remove the rear cover.
2. Remove the controller box cover [A] ( x 12).
3. Remove the cover from Slot A2 [B] ( x 2).
4. Put the Copy Connector Kit board [C] in Slot A2 and tighten the knob screws (x
2).
B659I103.WMF
B661I110.WMF
[B]
[C]
[A]