Ricoh B064 - Punch Unit (B377)

SPECIFICATIONS
SM 7-13 B064 Series/B140 Series/G126
Specifications
3.6 PUNCH UNIT (B377)
The Punch Unit B377 is installed in the 3000 Sheet Finisher B468/B469/B674.
Punch Specifications
North America (NA) 2/3 holes B377-17
Europe (E) 2/4 holes B377-27
Punch Position
Northern Europe (NE) 4 holes B377-31
Punching Allowed All modes
Holes Feed Paper Size
SEF A3 ~ A5, 11" x 17" ~ 51/2" x 81/2"2 holes (E)
LEF A4 ~ A5, 8
1/2" x 11", 51/2" x 81/2"
SEF A3 ~ A5, 11" x 17" ~ 51/2" x 81/2"2 holes (NA)
LEF A4 ~ A5, 8
1/2" x 11", 51/2" x 81/2"
SEF A3, B4, 11" x 17" 3 holes (NA)
LEF A4, B5, 8
1/2" x 11"
SEF A3, B4, 81/2" x 11" 4 holes (E)
LEF A4, B5, 8
1/2" x 11"
SEF A3 ~ A5, 11" x 17" ~ 51/2" x 81/2"
Allowed Paper Sizes
4 holes (NE)
LEF A3 ~ A5, 81/2" x 11", 51/2" x 81/2"
Holes Weight
2 holes
3 holes
4 holes (E)
4 holes (NE)
Allowed Paper Weight
2 holes (NA)
52 ~ 163 g/m
2
(14 ~ 43 lb.)
North America (2/3 hole) More than 60 K prints Hopper Capacity
Europe, Europe (4 holes) More than 80 K prints
Rated Voltage of Output
Connector
Max. DC 24 V
Dimensions (W x D x H) 700 x 620 x 960 mm (27.6" x 24.4" x 37.8")
Weight Approx. 65 kg (143 lb.) (with punch unit)
Power Consumption 72 W (3 A/24 V)
Power Supply DC 24 V