JOGGER UNIT (B513)
SM 1-75 B064 Series/B140 Series/G126
Installation
1.14.2 INSTALLATION
1. Turn the main machine switch off and disconnect the finisher from the main
frame.
2. Use the flat head of a screw driver to remove the left upper cover [A] from the
finisher and discard it.
3. Remove the cover plate [B] from the jogger unit ( x 2). Save the screws.
4. With the jogger unit connector on the left side, hook the frame of the jogger unit
[C] into the holes on the left and right side of the finisher frame.
5. On the left side, fasten the connector [D] to the socket ( x 1).
6. On the left and right side, attach the jogger unit frame to the side of the finisher
with the screws [E] provided ( x 2).
7. Re-attach the jogger unit cover to its frame with the screws removed in step 2
( x 2).
B513I001.WMF
B513I002.WMF
B513I003.WMF
[A]
[B]
[C]
[D]
[E]
To Next Page
Loading...
