FUSING UNIT
SM 3-75 B064 Series/B140 Series/G126
Replacement
Adjustment
[A]: Entrance guide plate ( x 2)
[B]: Pressure roller ( x 2)
NOTE: The pressure roller and pressure roller bearing should always be
replaced together.
[C]: Lubricate the inner and outer surfaces of the bushings with Barrierta S552R
grease.
NOTE: If the bushings are warm, allow them to cool before applying the
Barrierta grease. Applying the grease while the bushings are hot could
generate gas.
B140R995.WMF
B140R996.WMF
[A]
[B]
[C]
To Next Page
Loading...
