SERVICE PROGRAM MODE TABLES
SM 5-87 B064 Series/B140 Series/G126
Service
Tables
5846* UCS Setting
001 Machine ID (Delivery Server)
Displays the unique device ID in use by the delivery server directory. The value is
only displayed and cannot be changed.
This ID is created from the NIC MAC or IEEE 1394 EUI.
The ID is displayed as either 6-byle or 8-byte binary.
6-byte
%02X.%02X.%02X.%02X.%02X.%02X
8-byte
%02X.%02X.%02X.%02X.%02X.%02X.%02X.%02X
002 Machine ID Clear (Delivery Server)
Clears the unique ID of the device used as the name in the file transfer directory.
Execute this SP if the connection of the device to the delivery server is unstable.
After clearing the ID, the ID will be established again automatically by cycling the
machine off and on.
003 Maximum Entries
Changes the maximum number of entries that UCS can handle.
[2000~50000/1]
If a value smaller than the present value is set, the UCS managed data is cleared,
and the data (excluding user code information) is displayed.
004 Delivery Server Model (B064 only)
Changes the model of the transfer server that is registered for the I/O device.
[0~4/1]
0: Not used
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
005 Delivery Server Capability (B064 only)
Changes the functions that can be done by the server that is registered for the I/O
device.
Bit 7 = 1 Comment information
Bit 6 = 1 Address direct entry possible
Bit 5 = 1 Mail Rx confirmation possible
Bit 4 = 1 Address book auto update
Bit 3 = 1 Fax Rx function
006 Delivery Server Retry Timer
Sets the interval for retry attempts when the delivery server fails to acquire the
delivery server address book.
[0~255/1 s]
0: No retries
007 Delivery Server Retry Times
Sets the number of retry attempts when the delivery server fails to acquire the
delivery server address book.
[0~255/1]
To Next Page
Loading...
