SERVICE PROGRAM MODE TABLES
B064 Series/B140 Series/G126 5-98 SM
5959* Paper Size (B140 only)
001 Tray 1
The following paper sizes can be set. If the A3 DLT kit is not installed, you can
only use settings 0 and 1.
0: A4 6: 81/2 x 14 R (LG SEF)
1: 81/2x 11 (LT) 7: 81/2 x 11 R (LT SEF)
2:A3 8: B5
3:B4 9: B5 R (B5 SEF)
4:A4R (A4 SEF) 10: Custom Size
5:11 x 17
005 Tray 4 (LCT)
Tray 4 (LCT) accepts three paper sizes. Enter the correct number of the size of
the paper loaded in the LCT:
0: A4 4: 81/2 x 14 R (LG SEF)
1:81/2 x 11 5: B4 R (B4 SEF)
2:B5 6: 81/2 x 14 R (LG SEF)
3:A4 R (A4 SEF) 7: Custom Size
006 Cover Sheet DFU
The Cover Interposer Tray B470 is provided with two arrays of paper size sensors
to detect the paper size. However, some of the paper sizes may not be indicated
correctly on the display panel. For more details, refer to the Cover Interposer Tray
manual section “Paper Size Detection”.
5967* Copy Server: Set Function
[0~1/1]
0: ON
1: OFF
Enables and disables the document server. This is a security measure that
prevents image data from being left in the temporary area of the HDD. After
changing this setting, you must switch the main switch off and on to enable the
new setting.
5970 Debug Serial Output
5974* Cherry Server Do not change. Japan Only
To Next Page
Loading...
