MAIN MACHINE (B064 SERIES/B140 SERIES)
SM 1-17 B064 Series/B140 Series/G126
Installation
6. Remove the tray cover [A] ( x 2).
7. Remove the motor cover [B] ( x 4).
8. Re-position the side fences [C] ( x 8).
The outer slot position is used when
loading A4 size paper.
9. Re-install the motor cover and the tray
cover.
10. Remove the rear bottom plate [D]
( x 1).
11. Re-position the return position sensor
bracket [E] ( x 1). To use the paper
tray for A4 size, put the screw in the
left hole as shown. (For LT size, the
screw should be placed on the right.)
12. Re-install the rear bottom plate.
13. Change the paper size using SP5959-
001 (Paper Size – Tray 1). For details,
see SP5959 in section “5. Service
Tables”.
B064I566.WMF
B064I523.WMF
B064I024.WMF
[D]
[E]
[A]
[B]
[C]
To Next Page
Loading...
