SERVICE PROGRAM MODE TABLES
SM 5-119 B064 Series/B140 Series/G126
Service
Tables
7842 LS Clear: Prints by Size (B064 only)
Press Execute to clear counter SP7323 (Doc. Svr – Print Size Display).
7843 LS Clear: Print Job Logins (B064 only)
Press Execute to clear counter SP7324 (Doc. Svr. – Print Job Counter).
7844 LS Clear: Print to Page Distr. (B064 only)
Press Execute to clear SP7325 (Doc. Svr. – Job Count (Page No.).
7845 LS Clear: Print Job File Distr. (B064 only)
Press Execute to clear SP7326 (Doc. Svr – Job Count (File No.)
7846 LS Clear: Print Job Copies Distr. (B064 only)
Press Execute to clear SP7327 (Doc. Svr. – Job Count (Set No.
7847 LS Clear: Number of Pages by Mode (B064 only)
Press Execute to clear SP7328 (Doc. Svr – Job Count (Print Mode).
7848 Copy: All Clear (B064 only)
Press Execute to clear the following SP codes: SP7301, SP7304, SP7305,
SP7306, SP7320, SP7321, SP7323, SP7324, SP7325, SP7326, SP7327,
SP7328.
7852 ADF Scan Glass (B140 only)
Displays the count for the number of times the machine detected dust on the ADF
exposure glass strip at the beginning of copy jobs.
Count range: 00000 to 65535
The count is done only when SP4020 001 has been switched on (Default: Off).
For more, see SP4020.
001 Dust Counter
Total count for the number of times the dust warning
message was issued on the operation panel. This warning is
issued before the original is copied if there is dust on the
ADF exposure glass.
[0~1/1]
0: Off
1: On
This counter does not operate if SP4020-001 is switched off.
0002 Clear Counter
This counts how many times the machine moves the
scanner to a different leading edge position to correct the
above problem.
010 Counter Reset Resets SP7852-001 and 002
7901 Assert Info.
001 Filename
002 Line No.
003 Value
Used for debugging. DFU
7999 Engine Debug Log Switch
To Next Page
Loading...
