SERVICE PROGRAM MODE TABLES
SM 5-147 B064 Series/B140 Series/G126
Service
Tables
Dev Counter [0~9999999/1]
8771
These SPs count the frequency of use (number of rotations of the development
rollers) for black and other color toners.
Note: For machines that do not support color, the Black toner count is the same
as the Total count.
8791 LS Memory Remain
This SP displays the percent of space available
on the document server for storing documents.
[0~100/1]
Toner Remain [0~100/1]
8801
This SP displays the percent of toner remaining for each color. This SP allows
the user to check the toner supply at any time.
Note:
• This precise method of measuring remaining toner supply (1% steps) is
better than other machines in the market that can only measure in
increments of 10 (10% steps).
• This SP is expanded for color MFP and color LP machines. For this
machine, the count is done for black only.
Machine Status [0~9999999/1]
8941
These SPs count the amount of time the machine spends in each operation
mode. These SPs are useful for customers who need to investigate machine
operation for improvement in their compliance with ISO Standards.
001 Operation Time
Engine operation time. Does not include time while
controller is saving data to HDD (while engine is not
operating).
002 Standby Time
Engine not operating. Includes time while controller
saves data to HDD. Does not include time spent in
Energy Save, Low Power, or Off modes.
003 Energy Save Time
Includes time while the machine is performing
background printing.
004 Low Power Time
Includes time in Energy Save mode with Engine on.
Includes time while machine is performing
background printing.
005 Off Mode Time
Includes time while machine is performing
background printing. Does not include time machine
remains powered off with the power switches.
006 Down Time/SC Total down time due to SC errors.
007 Down Time/PrtJam Total down time due to paper jams during printing.
008 Down Time/OrgJam Total down time due to original jams during scanning.
009 Down Time/TonEnd Total down time due to toner end.
To Next Page
Loading...
