Ricoh B064 - Page 553

SERVICE PROGRAM MODE TABLES
SM 5-151 B064 Series/B140 Series/G126
Service
Tables
Text Mode
001*
MTF Filter Coefficient
(Text/Binary/Main scan)
Selects the MTF filter coefficient in the main
scan direction for Text mode.
Select a higher number for a stronger filter.
If this is “0”, the MTF filter is not applied.
[0~15/1]
002*
MTF Filter Coefficient
(Text/Binary/Sub scan)
As above, for sub scan
[0~13/1]
003*
MTF Filter Strength
(Text/Binary/Main scan)
Selects the MTF filter strength in the main
scan direction for Text mode.
Select a higher number for a stronger filter.
[0~7/1]
004*
MTF Filter Strength
(Text/Binary/Sub scan)
As above, for sub scan
[0~7/1]
005*
Smoothing Filter
(Text/Binary)
Selects the smoothing pattern for Text mode
when using binary picture processing mode.
A larger value could cause moiré to appear in
the image.
[0~7/1]
006*
Scanner Gamma
(Text/Binary)
Selects the scanner gamma type for Text
mode when using binary picture processing
mode.
[0~6/1]
007*
Brightness – Notch 7
(Text/Binary)
The following SPs adjust the image density
(brightness, contrast, and thresholds) for each
image density level (from 7 to 1) for Text
mode when using binary picture processing
mode. The settings are reflected in the
gamma table.
[0~255/1]
008*
Contrast – Notch 7
(Text/Binary)
[0~255/1]
009*
Threshold Level – Notch 7
(Text/Binary)
[0~255/1]
010*
Brightness – Notch 6
(Text/Binary)
[0~255/1]
011*
Contrast – Notch 6
(Text/Binary)
[0~255/1]
012*
Threshold Level – Notch 6
(Text/Binary)
[0~255/1]
013*
Brightness – Notch 5
(Text/Binary)
[0~255/1]
014 Density Level 5:
Contrast
[1~255/1]
015
Density Level 5:
Threshold
[1~255/1]
016
Density Level 4:
Intermediate Brightness
[1~255/1]
2002
017
Density Level 4:
Intermediate Contrast
[1~255/1]