Ricoh B064 - Page 557

SERVICE PROGRAM MODE TABLES
SM 5-155 B064 Series/B140 Series/G126
Service
Tables
Photo Mode
001 Main Scan MTF Level
Sets the MTF coefficient for the main scan
direction.
[0x00~0xFF/0x01]
002 Sub Scan MTF Level
Sets the MTF coefficient for the sub scan
direction.
[0x00~0xFF/0x01]
003 Main Scan MTF Strength
Sets the MTF strength for the main scan
direction.
[0~0x07/0x01]
004 Sub Scan MTF Strength
Sets the MTF strength for the sub scan
direction.
[0~0x07/0x01]
005 Smoothing Level Sets the smoothing coefficient.
[0~0x07/0x01]
006 Gamma Selection Selects the gamma setting.
[0x00~0x06/0x01]
0:Normal
1:Smooth
2:Distinct
3:Sharp
4:Text
5:Photo.
007 Dither Pattern [0x01/0x0x]
008
Density Level 7 Light:
Brightness
The following SPs adjust the image density
(brightness, contrast, and thresholds) for each
image density level (from 7 to 1) for Photo
mode when using the delivery scanner mode.
The settings are reflected in the gamma table.
[1~255/1]
009
Density Level 7 Light:
Contrast
[1~255/1]
010
Density Level 7 Light:
Threshold
[1~255/1]
011
Density Level 6:
Brightness
[1~255/1]
012 Density Level 6:
Contrast
[1~255/1]
013
Density Level 6:
Threshold
[1~255/1]
014
Density Level 5:
Brightness
[1~255/1]
015 Density Level 5:
Contrast
[1~255/1]
016
Density Level 5:
Threshold
[1~255/1]
017
Density Level 4
Intermediate: Brightness
[1~255/1]
2004
018
Density Level 4
Intermediate: Contrast
[1~255/1]