ADF (B140 SERIES/B064 SERIES ONLY)
SM 6-19 B064 Series/B140 Series/G126
Detailed
Descriptions
Here is a summary of the skew correction methods.
Skew correction sensor/entrance roller
B6, A5, HLT Larger Than A5
Duplex Scanning Yes Yes
Simplex Scanning Yes Yes
NOTE: Skew is always corrected with method { for every job, regardless of the
paper size and mode.
Interval sensor/pre-scanning roller stop correction
B6, A5, HLT Larger Than A5
Duplex Scanning Yes Yes
Simplex Scanning Yes No
NOTE: Use SP6020 (ADF Contact Mode In/Out) to enable skew correction method
for all jobs to ensure accurate original feeding. However, switching this
feature on slows original feed slightly.
Interval sensor/pre-scanning roller slow-down correction
B6, A5, HLT Larger Than A5
Duplex Scanning No No
Simplex Scanning No Yes
To Next Page
Loading...
