5. Operation switch
Press to turn the power on (the operation switch indicator lights up). To turn the power off, press again (the
operation switch indicator goes off). See “Turning On/Off the Power”.
6.
Control panel
See “Control Panel”.
7. Finisher (types 2 and 4 only)
Sorts, stacks, and staples multiple sheets of paper.
8. Internal tray 1 (types 1 and 3 only)/ Finisher shift tray (types 2 and 4 only)
Copied/printed paper and fax messages are delivered here.
9. Front cover
Open to access the inside of the machine.
10. Tray 1
Load paper here print side up.
11. Lower paper tray (optional)
Load paper here print side up.
12. Lower paper trays (optional)
Load paper here print side up.
Rear and right view
1. Right tray (optional)
Printed paper is delivered print face down.
2.
Upper right cover
Open this cover to remove misfed paper.
2. Getting Started
50
To Next Page
Loading...
