Inserting a USB Memory
This section describes how to insert a USB memory.
• Certain types of USB memory cannot be used.
1. Align
the USB memory in the correct direction, and then push it straight into the media slot.
When it is inserted correctly, the media access lamp beside the media slot lights.
• The media access lamp lights up and remains lit as long as a USB memory is inserted.
Removing an SD Card
This section describes how to remove an SD card.
1. Make sure the media access lamp is not lighted.
2. Push and release the SD card.
3. Pinch the SD card, and then pull it carefully out of the slot.
Inserting and Removing a Removable Memory Device
73
To Next Page
Loading...
