Loading Orientation-Fixed Paper or Two-Sided Paper
This section describes loading paper that has a specified orientation and printing side (such as letterhead
paper).
Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, punched paper, or
copied paper) might not print correctly, depending on how the originals and paper are placed. Set
[Letterhead Setting] to [Yes] in [Input / Output] under [Copier / Document Server Features], and then place
the original and paper as shown below. For details about Letterhead Setting, see “Copier and Document
Server Features”, Copy and Document Server Reference . For details about printing with the printer
function, see “Printing on Orientation-Fixed or Two-Sided Paper”, Printer Reference .
Original Orientation
Exposure glass ADF
• Copy
• Scanner
Paper Orientation
CCS030
: Shows to load the
paper print side up.
: Shows to load the
paper print side down.
Copy mode
Paper tray
Paper orientation
Trays 1 - 4 Bypass tray
One sided
Two sided
Loading Paper
79
To Next Page
Loading...
