4. [Energy Saver] key
Press to switch to and from Energy Saver mode. See “Saving Energy”.
5.
[Login/Logout] key
Press to log in or log out.
6. [User Tools/Counter] key
• User Tools
Press to change the default settings to meet your requirements. See “Accessing User Tools”, Network and
System Settings Reference
.
•
Counter
Press to check or print the counter value. See “Counter”.
• Inquiry
Press to find out where to order expendable supplies and where to call when a malfunction occurs. You
can also print these details. See “Inquiry”.
7. [Program] key (copier, Document Server, facsimile, and scanner mode)
• Press to register frequently used settings, or to recall registered settings.
See “Registering Frequently Used Functions” and “Registering Frequently Used Functions for Printing Stored
Documents from the Document Server”, Copy and Document Server Reference
.
See “Registering Frequently Used Settings”, Facsimile Reference .
See “Registering Frequently Used Settings”, Scanner Reference .
• Press
to program defaults for the initial display when modes are cleared or reset, or immediately after the
operation switch is turned on.
See “Changing the Default Functions of the Copy's Initial Display”, Copy and Document Server Reference
.
See “Changing the Default Functions of the Fax's Initial Display”, Facsimile Reference .
See “Changing the Default Functions of the Scanner's Initial Display”, Scanner Reference .
8.
[Interrupt] key
Press to make interrupt copies. See “Interrupt Copy”, Copy and Document Server Reference
.
9.
[Simplified Display] key
Press to switch to the Simplified Display. See “Simplified Display”.
10. [Sample Copy] key
Press to make a single set of copies or prints to check print quality before making multiple sets. See “Sample
Copy”, Copy and Document Server Reference
.
11.
[Start] key
Press to start copying, printing, scanning, or sending.
12. [Clear Modes] key
Press to clear the current settings.
13. [Clear/Stop] key
• Clear
Control Panel
55
To Next Page
Loading...
