101
1. Follow the procedure in "Main Machine Roller Replacement" to remove the
inner tray of Tray 1. This will allow you to see the rollers of Tray 2 and Tray 1.
2. Clean the rollers with a dry cloth.
3. Use the blower blush on the 2nd paper end sensor (1) and 2nd paper feed
sensor (2).
1
2
CEZ231
4. Use the blower brush on the 1st paper end sensor (1) and 1st paper feed
sensor (2).
1
2
CEZ232
5. Push the tray (Tray 1) and bottom tray (Tray 2) back into the machine.
6. Close the left and right front covers.
To Next Page
Loading...
Need help?
General
