24
WARNING
• To prevent electrical shock, turn off the color controller on the machine
control panel, turn off the operation power switch and then the main
power switch, and then disconnect the machine from the power supply
before replacing any parts or cleaning the machine's interior.
• Allow the machine to cool for at least 30 minutes before replacing a part.
What You Need
• Accessory hex screwdriver provided with the main machine.
Replacement Message
Replacement Required: Paper Feed Roller: (xxx)
Follow replacement instructions to replace the parts.
In the message, "xxx" denotes the number of the tray where the rollers must be
replaced.
Preparation: Print the counter list.
1. Press the [Counter] key on the control panel (see p.13 "Control Panel".) and
print out the counter list.
2. Turn the machine off. (See p.14 "Power Off Sequence".)
To Next Page
Loading...
Need help?
General
